Sygnały dźwiękowe BIOS

Pomocne w identyfikacji problemu sprzętowego są sygnały dźwiękowe BIOS (beep codes). W zależności od ilości pisków i ich długości można określić co musimy naprawić. Poniżej znajdują się sygnały dwóch najpopularniejszych BIOSów. Jak widać po angielsku, ale słyszałem że macie angielski zawodowy :)

Sygnały dźwiękowe AMI BIOS

Beeps	Error Message	Description
1 short	DRAM refresh failure	The programmable interrupt timer or programmable interrupt controller has probably failed
2 short	Memory parity error	A memory parity error has occurred in the first 64K of RAM.  The RAM IC is probably bad
3 short	Base 64K memory failure	A memory failure has occurred in the first 64K of RAM.  The RAM IC is probably bad
4 short	System timer failure	The system clock/timer IC has failed or there is a memory error in the first bank of memory
5 short	Processor error	The system CPU has failed
6 short	Gate A20 failure	The keyboard controller IC has failed, which is not allowing Gate A20 to switch the processor to protected mode. Replace the keyboard controller
7 short	Virtual mode processor exception error	The CPU has generated an exception error because of a fault in the CPU or motherboard circuitry
8 short	Display memory read/write error	The system video adapter is missing or defective
9 short	ROM checksum error	The contents of the system BIOS ROM does not match the expected checksum value.  The BIOS ROM is probably defective and should be replaced
10 short	CMOS shutdown register read/write error	The shutdown for the CMOS has failed
11 short	Cache error	The L2 cache is faulty
1 long, 2 short	Failure in video system	An error was encountered in the video BIOS ROM, or a horizontal retrace failure has been encountered
1 long, 3 short	Memory test failure	A fault has been detected in memory above 64KB
1 long, 8 short	Display test failure	The video adapter is either missing or defective
2 short	POST Failure	One of the hardware testa have failed
1 long	POST has passed all tests

Sygnały dźwiękowe AWARD BIOS

Beeps	Error Message	Description
1long, 2 short	Video adapter error	Either video adapter is bad or is not seated properly.  Also, check to ensure the monitor cable is connected properly.
Repeating (endless loop)	Memory error	Check for improperly seated or missing memory.
1long, 3short	No video card or bad video RAM	Reseat or replace the video card.
High frequency beeeps while running	Overheated CPU	Check the CPU fan for proper operation. Check the case for proper air flow.
Repeating High/Low	CPU	Either the CPU is not seated properly or the CPU is damaged. May also be due to excess heat. Check the CPU fan or BIOS settings for proper fan speed.

Więcej na http://www.bioscentral.com